Stop and Go Solder Kit LEGO Compatible
20150505_183720150505_1836Solder

Stop and Go Kit

$14.95

This is a soldering kit that you build yourself! The holes on the base of the stop-and-go light are Lego compatible.

In stock

SKU: KIT-002

Product Description

This is the Stop and Go soldering kit! Make this stoplight to learn a little about soldering and play.

Source files

README:

Stop and Go Kit v1

This is a soldering kit that you build yourself! The holes on the base of the stop-and-go light are LEGO compatible so you can build this kit into your various brick projects. You are welcome to create a derivative of this kit as long as it abides by the open source hardware definition.

This kit cycles through a red, yellow, and green LED from an ATtiny85. The code is written in Arduino.

This kit assumes you know how to solder. If not, there are plenty of online tutorials on how to solder. The kit is fairly quick to put together, roughly 10 minutes, and the chip has been programmed for you!

Materials and tools:

Here are the parts you’ll need to get stared:

3 LEDs (with a max current of 20mA)

1 220-ohm Resistor

2 47-ohm Resistors

1 ATtiny85

1 battery holder

1 3v battery

1 switch

Here are the tools you’ll need to get stared:

Soldering Iron

Solder

Wire Clippers

Licensing:

The Stop and Go Kit is an open source hardware product and follows the open source hardware definition.

The license on the source files for the Stop and Go Kit is CC-BY-SA

Distributed as-is; no warranty given. Not suitable for people who might eat electronics.

LEGO®  is a trademark of the LEGO® Group, which does not sponsor, authorize or endorse this web site.

Additional Information

Weight 0.09 lbs
Dimensions 7 x 9.5 x 1 in